SIFCO ASC develops robotic plating station for Safran Landing Systems
SIFCO Applied Surface Concepts (SIFCO ASC), one of the largest suppliers of contract selective electroplating and anodizing services in the world, announced it has developed the first robotic selective plating station for landing gear for Safran Landing Systems. The robot is now fully operational at a facility located in Gloucester, UK, while the works to install the process are under way at the Queretaro plant, where Safran also builds landing gear.
Demanding aerospace operating conditions present continual surface finishing challenges for manufacturers. Components need to be able to withstand friction, extreme temperatures and corrosive environments while continuing to operate at optimum levels. For Safran Landing Systems, one particular challenge came in the form of a landing gear bogie beam design.
Landing gear design includes a stop-pad between the bogie beam and vertical part of the component to prevent wear as it is retracted into the fuselage. However, this impact results in potential wear at the interface, with a further risk of atmospheric corrosion. A design modification was agreed involving the application of a nickel chrome electrolytic protective treatment. new landing gear to prolong the corrosion protection.
SIFCO ASC has partnered Safran on various surface finishing projects for over 20 years including more recent work to increase wear resistance on one of the aircraft’s axles. These projects are carried out using the SIFCO Process, a method of electroplating localized areas on components without the use of an immersion electroplating tank.
When Safran approached them for a solution for the nickel plating application to its landing gear, it was advised that this could be solved by manually plating a layer of nickel underneath a layer of chrome on the section of the bogie beam affected by corrosion. But Safran’s robust manufacturing quality standards required the process to be highly traceable and repeatable.
SIFCO ASC’s UK team consulted its French specialist engineering R&D department. Following a full situation analysis, the team recommended the SIFCO Process should be automated using a collaborative robot in order to adhere to Safran’s robust manufacturing standards.
However, this had never been done before and would require significant engineering expertise. In order to achieve the results demanded by the aerospace specifications, the two teams embarked upon a collaborative research project.
Initial work began at the end of 2013. Safran tested the nickel material in its specialist facility under simulated take-off and landing conditions. Once it was confirmed that the material was suitable in early 2014, SIFCO began work on designing the robotic system. During this time, to fast-track the benefits of the SIFCO Process, the plating was carried out manually.
The robot, now fully operational at Safran Landing System’s Gloucester facility, provides the company with a precise and highly traceable, repeatable and accurate process, well-suited to the hi-tech facility it sits within.
The integrated computer logs all of the relevant information including: the parameters plated; the batch numbers for the solution; current densities and solution levels. The fully-automated system also adheres to the company’s health and safety policy as it minimizes human contact with harmful chemicals. It currently processes 30 bogie beams per month and the team is looking to expand its use into other areas of the company.
Consistent plating uniformity has been achieved using this process, standing up to the robustness of the necessary qualification testing.